Forged Steel Ball Valve
Forged carbon Steel Ball Valve, Three Piece Design, Socket Weld / Screwed End, Class 150/300/600/800/900/1500/2500, Full Bore, Body, side Pieces as per ASTM A 216 Gr. WCB / ASTM A 105, S.S. 304 Bail and Working Parts, PTFE Seat and Seal, Lever Operated.
Three Piece Design Full / Conventional Port Locking Arrangements.
| Size | Pressure Rating | End Connection type |
|---|---|---|
| DN6 to DN50 NPS ¼ to NPS 2 |
150# / 300# / 600# 800# /1500# / 2500# |
Socket Weld End Connection Butt weld End Connection Screwed End Connection Flange End Connection Ring Type Joint (RTJ) |
Material of Constructions
| Body / End Piece Material: Forged Carbon & Carbon Alloy Steel: |
Forged Stainless, Duplex and Nickel Alloy Steel: | Trims Material: |
|---|---|---|
| Carbon Steel, Low Temperature Steel, High Temperature Carbon-Alloy Steel etc. | Duplex and Super Duplex Steel of all Grades, Austenitic Stainless Steel of all Grades, Hastelloy and other High Nickel Alloys. |
SS410 / SS304 / SS316 / SS304L / SS316L |
Technical Detail
| Design & Manufacturer Standard: | Testing & Inspection Standard: | Type of Bore: | Operated Type: |
|---|---|---|---|
| BS 5351 / ASME B16.34 | API 598 / BS 6755 Part-II | Regular (Reduced) Standard (Full Bore) | Pneumatic Actuator, Electric Actuator & Hand Lever |
Salient Features of Forged Steel Valve
- Compact forged body requires minimum space for installation.
- Ensures Maximum Safety and economy.
- Precisely Designed
- Weld-deposited or Press Fitted Seat Rings.
- Suitable for High Pressure & Temperature applications.
- Maintenance friendly.
-
1. BODY
The body is forged steel and designed to the basic dimensional requirements of the applicable specifications such as BS 5351 and ASME B16.34.
-
2. END PIECE
The End Piece is forged steel, which has dimensions per the applicable specifications such as BS 5351 and ASME B16.34. The End Piece is available in both the full or conventional port design.
-
3. BALL
The Ball, which is solid design, is forged or investment cast steel and is part of the valve trim.
-
4. STEM
The stem is forged steel and part of the valve trim. The stem is designed to the basic dimensional requirements of the applicable specifications such as BS 5351 and ASME B16.34.
-
5.GLAND NUTS
The gland, gland flange assembly utilizes a separate, two piece design. This self aligning design allows the flange to be unevenly tightened while the gland maintains its parallel alignment with the stem and stuffing box.
-
6. HANDLE
The Handle is MS Fabricated of an open spoke design. This robust construction along with appropriate sizing allows for ease of operation.